User manual, 1510 v1.13 Owner's manual

Configuration
3.3
80
Warning volume
Set the volume of the 2N
®
Helios IP signal tones that announce status changes.
Key beep volume
Set the volume of the tone generated whenever a key is pushed.
Lock open volume
Set the volume of the unlocking signalling tone.
Call tones
Set the volume of the dialling, ringing and busy tones if generated by 2N
®
Helios IP.
Ringing
Set the volume of the incoming call signalling tone –
are signalled when the automatic incoming call
receiving function is off, see the E-Mail
2N
®
Helios IP can, in case the called user is unavailable, send an e-mail message
including basic information on the missed call. If 2N
®
Helios IP is equipped with a
camera, a preset count of pictures on the call course can be sent (for Part Nos.
9137131(CK)E, 9137161(CK)E and 9137111(CK)E with a proper licence key only, Part
No. 9137901).