Owner's manual

1152N TELEKOMUNIKACE a.s., www.2n.cz
®
111–116
Set 1 –
confirmation
mode for
number 1–6
1–6 1
1 = with confirmation DTMF
(1), 2 = confirmation of
picking up (supported only
for GSM/UMTS/VoIP), 3 =
CPC Antenna, 4= CPC
KONE, 5 = P100, 6 =
autodetection DTMF
protocol (CPC
Antenna/P100), 7 = CPC
Antenna 2N ext, 8 = CPC
KONE 2N ext, 9 = P100 2N
ext
2N ext is a protocol that
transmits the shaft number
and audio unit position
together with the ID (to be
displayed in ).2N
®
Lift8
If there is no guarantee of
problem-free transfer of
DTMF, do not set 6 for
autodetection CPC
Antenna/P100, but
precisely specify the
protocol to be used (3 or
5).
021
Set 2 –
ALARM 2
button
memory 1
up to 16
digits: 0–9
Entering characters ,
and ' for a 1-secondp'
pause while programming
is possible via a PC (use 2N
). Service Tool
®
If set 2 of the memALARM
ories is completely empty,
022
Set 2 –
ALARM 2
button
memory 2
up to 16
digits: 0–9
023
Set 2 –
ALARM 2
button
memory 3
up to 16
digits: 0–9
024
Set 2 –
ALARM 2
button
memory 4
up to 16
digits: 0–9
025
Set 2 –
ALARM 2
button
memory 5
up to 16
digits: 0–9