Owner's manual

1212N TELEKOMUNIKACE a.s., www.2n.cz
®
968
Machine
room alerting
time (siren)
1–60 s 1 s not implemented
969
Intercom
alerting time
1–60 s 1 s not implemented
973
Language for
numeric
messages
0–1 1
0 = user recorded, 1 =
voice menu language
User-recorded digits are
played only if values 11, 12
or 13 are set in parameters
975–979 or 971.
974
Intercom
identification
number
up to 16 digits:
0–9
empty
Provide lift identification for
foreigners, for example. If
not filled in, the serial
number is used.
975
Local (cabin)
message
sequence
(Alarm)
up to 10
announcements in
sequence
Start announcements in
more languages in a
defined sequence, including
the identification number,
etc.
Message list:
01 = User message 1
02 = User message 2
03 = User message 3
04 = User message 4
05 = User message 5
06 = User message 6
07 = User message 7
08 = User message 8
09 = User message 9
10 = User message 10
11 = Serial number
12 = Lift identification
number (par. 974)
13 = Lift shaft number
(1–8)
14 = Pause (2 s)
15 = Confirmation tone
Cautions:
User messages to are1 10
recorded into the withCU
the aid of the 2N Service
®
.Tool
976
Outgoing
message
sequence
(before
confirmation
by 1)
up to 10
announcements in
sequence
977
Checking call
message
sequence
up to 10
announcements in
sequence
978
Call
confirmation
message
sequence
up to 10
announcements in
sequence
979
Outgoing
message
sequence by
pressing 3
after call
confirmation
up to 10
announcements in
sequence
971
Call end
sequence
up to 10
announcements in
sequence