Owner's manual

1232N TELEKOMUNIKACE a.s., www.2n.cz
®
800 Set time hhmm
Read the current time
setting and configure a new
one if necessary. *
801 Set date RRMMDD
Read the current date
setting and configure a new
one if necessary. *
898
Cancel
working
configuration
Cancel all the changes
performed during this
configuration call except for
the date/time setting –
confirm this by an asterisk.
*
899
Complete
initialisation
(including
servicing
password!)
Re-enter the valid servicing
password to protect the
system against
unintentional deletion
during incorrect function
number entering. *
1001 Enable data 0–1 0
Permit the use of the
GSM/UMTS module
connection to the provider's
data network. **
1002 APN
Configure the mobile
provider's access APN
server. **
1003 Login
Configure the username for
authentication in the
provider's APN server. **
1004 Password
Configure the authorisation
password in the provider's
APN server. **
1100
Enable DHCP
client
0–1 1
The DHCP server assigns
PCs in particular the IP
, , address net mask
and adgateway DNS server
dress via the DHCP.
0 = disabled
1 = enabled
1101 IP Address
IP address defined for the
Ethernet interface (VoIP
module). **
1102 Netmask Set the subnet bit mask. **
1103
Default
gateway
Set the IP address of the
router/PC via which
communication outside the
internal net is made. **
1104 DNS server
Set the DNS server IP
address. **