Owner's manual

1242N TELEKOMUNIKACE a.s., www.2n.cz
®
1105 SIP server
Set the IP address for
connection to the
counterparty (PBX,
operator). **
1106 User
Set the user name for
connection to the
counterparty (PBX,
operator). **
1107 Password
Set the password for
connection to the
counterparty (PBX,
operator). **
1108
Enable
in-band
DTMF
detector
0–1 0
1109
SIP server
port
1–65535 5060
Set the PBX (operator) port
via which the SIP Proxy
communicates with the
terminals connected. **
1220 Camera type 0–2 1 not implemented
1221 Resolution 0–4 2 not implemented
1222
Compression
ratio
1–100 60 not implemented
1230
Client
enabled
0–1 0
not implemented
1231
Server IP
addres
empty not implemented
1232 Server port 1–65535 7008 not implemented
1234 Password empty not implemented
* This parameter can only be configured via the voice menu (incoming call to or viaL8
the machine room audio unit).
** This parameter can only be configured via the .2N Service Tool
®
Configuration by Computer
Install the to configure connected to a PC via the USB or via the2N Service Tool
®
L8
Internet using the IP address (UMTS version only). You can also upgrade of theL8
firmware.
Install and launch the from the included CD for more details. Find2N Service Tool
®
the current version at .2N Service Tool
®
www.2n.cz/Lift8
Caution
Parameters 1003 and 1004 are used for username and password
configuration for verification at the provider's. Most providers do not use
any verification. If the your provider requires verification, it must give you
the necessary access data.