Owner's manual

1332N TELEKOMUNIKACE a.s., www.2n.cz
®
Incoming Call
The control centre can also call back to the communicator. The CU automatically
receives every incoming call, identifies itself and, via a voice menu (DISA), offers you
another function to get through to the required . Incoming calls are timeaudio unit
limited as outgoing calls and are processed in the same way (extension, termination).
Press 0 in the voice menu for connection with the last-calling .audio unit
Incoming Call Voice Menu
Welcome, this is a 2N Lift 8 communicator
Press 0 to dial the last-calling audio unit
Enter the lift number X to dial another audio unit
Press 1 to dial the lift cabin
Press 2 to dial the cabin roof
Press 3 to dial the lift bottom
Press 4 to dial the shaft bottom
Press 5 to dial the machine room
Press o return to the main menu# t
Press 9 for administration
Press 1 to enter the programming menu
Press 2 to terminate the rescue process
Press 3 to listen to your communicator info
Press o return to the main menu# t
Press o end the call# t
Call Sequencing
If another request arises during communication, the calls are ordered according to
priorities: Fireman has the highest priority, followed by Alarm. These calls suspend any
lower-priority call. Calls with identical priorities are queued and processed one after
another. Having done that, recovers the suspended activity if possible.L8
Ongoing: new
event
Incoming
call
Programming
Check
call
ALARM Triphony Fireman
Incoming call
na ns na na/ns S ns
Check call
time
q q na q q q
Entering voice
menu from
machine room
audio unit
ns ns ns ns ns ns*
TRIPHONY
button press
ns ns ns ns ns ns
ALARM button
press
S S q q S q
Fireman
function
S S S S S na