Owner's manual

1462N TELEKOMUNIKACE a.s., www.2n.cz
®
verify the setting. Enter the username and password for the login; see the figure.CU
Now select the server connection and click Connect or double-click the selected server
with the left button to log in to the . 2N Lift8 Central Unit
®
Figure: Application Window
Click New server and New group to create a tree structure of your own. Log in to the
to save the settings. Select a connection and press Delete selected to remove aCU
connection.
If you use a USB cable for connection, select the USB connection type. The screenCU
will change and the login name and password will only be visible. Enter the correct
values. Refer to the text below for the default values. Now connect the and click CU
Connect. The automatically finds the connected on the PC2N Lift8
®
Service Tool CU
and starts downloading parameters and logs. Having completing the download, the 2N
is ready for work. Lift8
®
Service Tool
Warning
Make sure that the USB port driver for the has2N Lift8
®
Central Unit
been installed properly on the PC to avoid identification and login failures.
If a problem with non-compatible version of .NET occurs during
installation, you should download the new .NETFX4.0 version from
. You can use this from the online manual.www.2n.cz link
Minimum operating system requirements: .Windows Vista, 7, 8