Owner's manual

1552N TELEKOMUNIKACE a.s., www.2n.cz
®
5.3 Use
Upon the application launch, you get to the Configuration main menu and then the
Parameters – Basic menu, where you can find almost all the s2N Lift8
®
Central Unit
ettings. You are in the offline configuration, which you can modify, save into a file
and prepare for download into the any time later. The offline mode helps you viewCU
the settings, logs and diagnostic packages. You have access to the ConfigurationCU
and Logs menus. The other menus are meaningful only if the is connected. TheCU
meaning and description of the parameters and controls are the same as in the online
mode (i.e. with the connected); see below for details. Follow the loginCU CU
instructions in Subs. 5.1. Now let us explain what the menus are used for.
Configuration
Parameters
Having logged in to the as described in the preceding subsection, you get into theCU
main configuration menu. The menu includes the table of all the Parameters – Basic
parameters including their codes. Refer to . for the list of2N Lift8
®
Subs. 3.2
parameters and their meanings. All the parameters are arranged in associated groups
for convenience. Moreover, each table row is equipped with a hint, which describes the
parameter purpose and setting options. The table includes the following items: Code
corresponds to the parameter number in the voice menu, Name displays theCU
parameter name, Value shows the currently set parameter value and Unit specifies the
parameter unit (if no unit is specified in this column, the value is just a number).
Maximum and Minimum define the permitted range of the values to be set. Default
value displays the factory value of the parameter (which also appears after the factory
reset). Click this value to add it to the value column.