Owner's manual

1672N TELEKOMUNIKACE a.s., www.2n.cz
®
6.1 Installation and Licensing
The is an application necessary for a correct operation of the 2N Lift8 Server
®
2N
®
, and ItsLift8 Central Unit 2N Lift8 Control Panel
®
2N Lift8 Communicator.
®
purpose is to mediate communication between these devices and user interfaces.
Installation
After the application is launched, the installation program will scan your PC for another
version and ask you whether or not to uninstall the currently2N
®
Lift8 Server
available version if any. If you deny, the installation wizard will be terminated. If you
agree, the original version will be uninstalled. Then you will be asked whether the
configuration files should be removed too. If you select no, the existing configuration
will be retained and the application will only be updated. Now the 2N Lift8 Server
®
has been launched. Follow the wizard instructions. Select the Setup Wizard 2N Lift8
®
installation location: Server C:\Program Files (x86)\2N TELEKOMUNIKACE\2N
is used by default.Lift8\Server
The default port for communication with other applications is 7008 and can be changed
if necessary. Make sure that the port is accessible from the LAN (see the Note above)
and correctly set in all the applications. Now the wizard is ready to install your 2N
®
. It displays an overview of the settings. Check them carefully as you willLift8 Server
not be able to modify them after installation unless you re-install the application! If you
detect an error, press Back to return to the error window. If all the parameters are OK,
click Install to install the . The service will be2N Lift8 Server
®
2N Lift8 Server
®
launched automatically after installation. If, for any reason, the automatic launch
failed, start the service manually. Now your is ready for use.2N Lift8 Server
®
Caution
Be sure to install the on a PC with Internet connection 2N Lift8 Server
®
or in a LAN which includes a SIP Proxy to make check and alarm calls
properly. While configuring the system, you can select the RTP ports to be
redirected to your LAN via NAT.
Note
The installation requires of free disk space at2N Lift8
®
Server 250 MB
least.
Further setting modifications can be done via the 2N Lift8 Server
®
2N
®
.Lift8 Control Panel
Warning
If a problem with non-compatible version of .NET occurs during
installation, you should download new version of .NETFX4.0 from
. From online manual you can use this .www.2n.cz link
Minimum operating system requirements: Windows Vista, 7, 8