Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
1732N TELEKOMUNIKACE a.s., www.2n.cz
®
Parameter Set Commands
–sListenPort
sets the server listening port.
–sLogLevel
sets the server logging level (1–5).
–sMaxUser
sets the maximum count of users to be connected to the server at the same
time. The maximum count is based on the licence.
–sMaxLift
sets the maximum count of lifts to be connected to the server at the same time.
The maximum count is based on the licence.
–sResetAdmin
resets the Admin password to default '2n'.
Server Commands
–cStartServer
starts the l8 server.
–cStopServer
stops the l8 server.
–cRestartServer
restarts the l8 server.
–cExportDatabase
exports the database to an XML file.
–cImportDatabase
imports the database from an XML file. Make sure that the server has been
stopped to avoid operation failure.