Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
1902N TELEKOMUNIKACE a.s., www.2n.cz
®
Checking Calls
The menu includes a table of all the check calls received by the Checking Calls 2N
®
from intercom addition until now. Click the filter button at each column toLift8 Server
use filtration for call history search. Refer to the Calls subsection for details. The table
provides the following information: check call Timestamp, Contact number,CU
Intercom identification if CPC/P100 was successfully used and check call Result string.
See the figure below.
Intercoms – Checking Calls MenuFigure:
Alarm Calls
The menu includes a table of all the alarm calls received by the Alarm Calls 2N Lift8
®
from intercom addition until now. Click the filter button at each column to useServer
filtration for call history search. Refer to the Calls subsection for details. The table
provides the following information: alarm call Timestamp, Contact number, ShaftCU
number, Audio unit position, Intercom identification if CPC/P100 was successfully used
and call-processing Agent name. The last column Note shows the note entered by the
dispatcher during the alarm call.
Intercoms – Alarm Calls MenuFigure:
Map
If you filled in the intercom address in the General menu, the menu will displayMap
the intercom map position. Use the slider in the left-hand upper corner to zoom in and
out. The intercom address is also displayed below the map. If the address is incorrect,
change it here. The change will appear in the General menu too. Click Check address to
set a new address and press Save to add the address to the database.