Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
2052N TELEKOMUNIKACE a.s., www.2n.cz
®
Plans
The menu helps you manage plans of the buildings in which the intercoms arePlans
installed. Assign the plans to the selected intercom and mark the intercom position in
the Intercoms menu. This information will then be displayed to the 2N Lift8
®
operators.Communicator
Plans MenuFigure:
Click Add plan to open a file browser and select the file to be added. Refer to the right
part of the screen for the figure to be imported. Click Save to confirm the new plan.
Tip
If your outgoing gateway has 4 channels, make sure that the Maximum
amount of simultaneous outgoing calls does not exceed 4. Otherwise, the
server would try to make more calls than the gateway is able to process
and the excess calls would be rejected. The server would thus be marked
as non-functional after several rejections.
Tip
All the saved plans are stored in the and accessible to2N Lift8 Server
®
all the logged-in users.