Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
2242N TELEKOMUNIKACE a.s., www.2n.cz
®
8.3 Use
The application is used by dispatchers and technicians for2N Lift8
®
Communicator
intercom and communication. Every user with a login and SIP line created in the CU
may log in to the application. If the user SIP line is not2N Lift8
®
Control Panel
registered, the user will not be able to log in.
Application at Relax
When the user logs in the application is at relax and in the case of an
incoming/outgoing call it gets into one of the other two states. You return to this
window whenever you terminate the call with the Save button.
Intercoms
The left section of the menu provides a list of all the intercoms that areIntercoms
assigned for administration to the currently logged-in Dispatcher or Technician by the
Administrator. Click on the intercom name to display more information: Name,
Intercom identification, Contact number and Address if available. If the address is
completed, the intercom Location on map is displayed too. Use the slider in the
left-hand upper corner of the map to zoom in/out. Click Call to call any intercom on the
list. You will be forwarded to the Outgoing call window.
Caution
Telephoning is the main function of the application. If the user SIP line
cannot be registered, the user will not be able to log in. In that case, ask
your system administrator to check the SIP line settings in the 2N Lift8
®
or your LAN settings and your PC firewall ifControl Panel SIP Proxy,
necessary.
Note
Every user may process any incoming call to its line but make outgoing
calls only to the intercom/technician numbers included in the database.