Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
342N TELEKOMUNIKACE a.s., www.2n.cz
®
CU Connection to Telephone Network
You can connect the to any of the following telephone networks: CU
PSTN
PBX
GSM
UMTS
VoIP
PSTN
works in a broad band regardless of polarity and line parameters (refer to 2N Lift8
®
Technical Parameters). Connect it using the enclosed cable with an RJ–12 terminal. It
is the most reliable and simplest connection. The disadvantage is the operating cost
(fixed fee).
Caution
Only one may be connected to one telephone line and no other endCU
telephone equipment may be connected to the line including a product
through which the telephone line goes (so-called priority connection –
electronic burglar alarm, e.g.).
No dual or party lines may be used.
No telephone “multiplugs” (adaptors), even the smart ones, may be used.
Never connect to an ISDN line.2N Lift8
®