Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
442N TELEKOMUNIKACE a.s., www.2n.cz
®
Product Completeness Check
Check the product for completeness before installation.
The cabin package contains (assembled):audio unit
1 electronics board
4 terminals slid onto the board; see the photo
1 jumper slid onto the board; see the cover printing
1 mounting panel
1 speaker connected directly or by cable
1 microphone connected directly or by cable
1 cover with printing
5 tightening straps
Mounting
Electronics Mounting
This is intended for mounting behind the lift control panel. Typically, theaudio unit
panel is ready for installation as shown in the drawing below:
Figure: Mounting Hole Dimensions for Audio Unit – Cabin Universal
To mount the , you need 4 electrically spot welded or screws, aaudio unit M3 M4
sufficiently perforated speaker area and a microphone hole. In emergency, you can fix