Owner's manual

562N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
3.
4.
5.
Operation
This type of is operated by qualified people (lift maintenance staff,audio unit
e.g.).
Push the TRIPHONY button to activate voice communication with the other audio
of the same lift. Push and hold the button for over 2 seconds to activateunits
communication with another lift (to display a voice menu and select the required
lift number).
Push the ALARM button to call the control centre, for example. The audio unit
calls the numbers configured in the ALARM memory – set 2 (021–026). The
ALARM button illumination (not required by default) helps you find and activate
the easily in the dark.audio unit
When you press the ALARM or TRIPHONY button, the function is called up
immediately. Speak HandsFree or use a handset for better acoustic properties.
Press for more than 2 s to display the voice menu.
Before You Start
Requirements
Connect a handset supplied by the manufacturer to the to avoidaudio unit
handset operation error.
Product Completeness Check
Check the product for completeness before installation.
1 audio unit
1 handset
2 wall plugs
2 wall plug screws
7–8 jumpers for common machine room configuration
Mounting
The is typically mounted on a wall using the wall plugs and screws includedaudio unit
in the delivery.
Caution
If no number is specified in the ALARM memory – set 2 (021–026), the
dials the numbers defined in the ALARM memory – set 1audio unit
(011–016).
Push the ALARM button to call the control room or machine room audio
configured as an intercom.unit
The ALARM and TRIPHONY buttons shine even at relax.