Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
732N TELEKOMUNIKACE a.s., www.2n.cz
®
c.
1.
the next page. TIP: If you have drilled the corner holes too, use the four
M4 headless screws of the length of 30 mm included in the delivery. Screw
the screws into the audio unit backside holes and tighten them as
instructed in item b) above. Although not equipped with nuts, the screws
will prevent the product from shifting or turning.
Mounting Completion – Without Rear Access