Owner's manual
Table Of Contents
- 1. Product Introduction
- 2. Description and Installation
- 3. System Configuration
- 4. Function and Use
- 5. Service Tool
- 6. Server
- 7. Control Panel
- 8. Communicator
- 9. Maintenance
- 10. Technical Parameters
- 11. Supplementary Information
972N TELEKOMUNIKACE a.s., www.2n.cz
®
Flush Mounting – Thermally Insulated Wall
:What you need for installation
Longer screws (depending on the thermal
insulation thickness)
For :2N Lift8 Fireman
®
Covering frame: contact your distributor
Flush Mounting – Hollow Bricks
:What you need for installation
Flush mounting kit, Part No. 9151001
For :2N Lift8 Fireman
®
Covering frame: contact your
distributor
Flush Mounting – Plasterboard
:What you need for installation
Flush mounting kit for plasterboard, Part No.
9151002
Pro :2N Lift8 Fireman
®
Covering frame: contact your distributor
Caution
The warranty does not cover any defects or failures of the product arisen
as a result of improper mounting in contradiction to these instructions.
A wrong mounting procedure may lead to damage to the electronics due
to . The circuits are constantly under voltage and waterwater infiltration
leakage causes electrochemical reaction. No warranty can be claimed for
products damaged in this manner!