User's Manual

Your value-added selection  3e 
6
How To Turn On Transmitter
( 1 ) Power on receiver.
( 2 ) Push any toggle switch and release OR push any axis-fingertip joystick and release to
operate
( 3 ) And simply push R1 toggle switch to on & release
( 4 ) Now Hercules is ready for operation.
How to Turn Off Transmitter
( 1 ) Push-down EMS button, then pull out the power-on key.
The EMS stop button is with dual protections, every motion will be terminated in 0.1 sec.
( 2 ) Always pull out power-on key after transmitter is no usage.
( 3 ) shut down receiver.
How to install receiver
Tools:
long nose plier diagonal cutting plier cross head screwdriver
hexagonal head wrench mulitmeter electric drill cable and feeder
Steps:
(a) Ensure the original wired-control operates normally
(b) Switch off the main power of crane before installation
(c) Receiver must be installed in a stable & easy-seen location
(d) Installation location shall keep away from motor, relays, cables, large adapter, high voltage
equipment or screen which may intermit the electric wave transmitting
5