User's Manual

Your value-added selection  3e 
9
Function Checking/ Maintaining Steps
Takes 2 minutes to check / maintain device regularly will always extend Hercules operation
period…
Hercules checking steps –
1. Keep safety distance between loading goods / crane and operators
2. Send power to receiver
3. Switch on transmitter by steps ( please refer ‘ how to power on transmitter, p.6 )
4. Push joysticks gently ( from the slowest speed ) , see if the control direction is correct
if yes means normal …
Ensure the transmitter EMS button hasn’t been stuck.
Ensure the joystick dust-shield isn’t broken
Ensure transmitter waist-belt isn’t broken ( call your agent for these matters w/o hesitation )
if no means malfunction occurred…
1. Push down EMS button IMMD and pull out POWER key.
2. Ensure the working hoist is stopped completely
3. Loading the goods to the safety place FIRSTLY with the original wired-control
4. Check the indicators from receiver panel
Trouble Shooting
TRANSMITTER…
1. Under stand-by status, the indicator is green and blinking 1 times per 2 sec.
2. Under operation , the indicator is green and blinking 2 times per 1 sec
indicator
( fig. 8 )
8