User's Manual

Your value-added selection  3e 
10
3. If indicator turns to red…
it means power low, please replace batteries IMMD.
RECEIVER…
1. If indicator is off…
Please check if no power supply or fuse is fused.
2. If indicator turns to red and blinking un-regularly…
It means an interruption occurred by unidentified signal , please contact with your supplier
IMMD.
3. If indicator turns to red and blinking un-regularly ( blinking slowly, 1 times per sec. )…
It means CPU is stop working, please power off and re-power again.
4. If indicator turns to red and blinking un-regularly ( blinking fast, 3 times per sec. )…
It means the address codes between transmitter and receiver switched different, please check
the code on both transmitter and receiver to switch them to the same position.
ID Label ( serial number )
Every Hercules remote controller ( both in transmitter & receiver ) has a water / rubber-poof
label, which shows the type of device, Channel, ID No., serial number and frequency.
Transmitter
sticker
( fig. 9 )
( fig. 10 )
( fig.11 ) transmitter label
(
fi
g
.12
)
receiver label
receiver sticker
9