User Manual

Quick Release Plate Clamp Knob

Camera Screw

Casing

Pan Lock

Pan Arm Attachment

Point (one on each side)

Pan Base

Tilt Lock

1 2

ANATOMY OF AN AIRHED CINE

The clamp has an orange locking knob (2) for

releasing the Plate.

NEVER undo any of the knobs without holding your

camera.

IMPORTANT

The Release Plate included in the 3 Legged Thing

Legends Tripod Kits has security bolts tted. These

t into the cut-outs engineered in the AirHed Cine

and are intended to give you an additional level of

security.

It is important that you tighten your release plate onto

the clamp completely and check, before use.

Your release plate may come with additional

mounting screws you might not require. Unscrew

these and put them somewhere for safekeeping.

The panning arm can be attached on the left or the

right for either left or right-handed users. Simply rotate

the screw head to ensure the handle is in the desired

position and screw it into the panning arm threads

located on the left or right side of the AirHed (a).

The AirHed Base features a ratchet function in the

pan lock (7 above) which enables you to reposition

the locking knob if it cannot turn due to its position.

To adjust the position, pull the ratchet away from the

base of the AirHed, turn it until it has space to move,

then click it into place. Then you can turn it to loosen

or tighten the lock as required.

AirHeds and Release Plates

Bubble Levels

9 10

Pan Arm

Accessory Attachment

Thread 1/4”-20