MONOPOD INSTRUCTION MANUAL ® BUILT TO ENABLE. CREATED TO INSPIRE.
Look at the end of your box. See that little sticker with a serial number and a barcode? Peel it off and put it here for safe keeping. Or don’t. IMPORTANT DO NOT USE YOUR MONOPOD UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE MISUSE OR INCORRECT USE OF THESE PRODUCTS.
ANATOMY OF A MONOPOD 1 Retractable Screw Mount 2 Mounting Plate 3 Bubble Grip 4 Leg Section 5 Twist Locks 6 Boot / Footwear Using The Monopod Always hold your camera when removing from the monopod! To open and extend the monopod simply grip the twist locks (5) in your hand, quarter turn, loosening the monopod allowing you to select a desired height. Once the required height has been obtained lock the monopod in place by rotating back to the original position, which will fully engage the leg lock.
ANATOMY OF DOCZ 1 3/8”-16 Screw Thread 2 Screw Lock 3 Ball 4 Legs 5 Leg Buttons 6 Rubber Boot / Ball Adjuster 7 Rubber Feet Using Docz To open the legs from folded, pull down until they click into place. To fold them back up, press the button (5) at the base of each leg and fold upwards. To attach to a monopod unscrew the rubber Boot and the adapter in the base of the monopod. If this adapter is stuck, you can remove this by using tools, or a coin, and turn it anti-clockwise.
Warranty Information Your 3LT product comes with a 5 Year Global Warranty. On the box you will find a sticker with a unique barcode and serial number. Use this serial number to register your products at www.3leggedthing. com/register. Details of your warranty can be found at www.3leggedthing.com. Your warranty covers 3 Legged Thing products only. If you have a question or suspect you have a fault, contact us first at support@3leggedthing.com.
3LT Social Media #3LeggedThing /3LeggedThing @3LeggedThing Unit 9 Kinsbourne Farm Bury End Stagsden Bedfordshire MK43 8TS United Kingdom of Fadeless Splendour