SDS

ManualsBrands303 ManualsCleaning32 fl. oz. Fabric Guard Spray

Safety Data Sheet

Section 1: Identification

Product identifier

Product Name

•

WERCS 303 Fabric Guard

Synonyms

•

591216

Product Code

•

130606; 30602; 30603; 30604; 30605; 30606; 30607; 30616; 30618; 30674

Relevant identified uses of the substance or mixture and uses advised against

Recommended use

•

Product is used on recommended materials to create water repellency

Restrictions on use

•

Read and follow label directions for product use, safety warnings and hazards

Details of the supplier of the safety data sheet

Manufacturer

•

Gold Eagle Co.

4400 S. Kildare Avenue

Chicago, IL 60632-4372

United States

http://www.goldeagle.com/

Telephone (General)

•

773-376-4400

Emergency telephone number

Manufacturer

•

1-800-535-5053 - (INFOTRAC #22283)

Section 2: Hazard Identification

United States (US)

According to: OSHA 29 CFR 1910.1200 HCS

Classification of the substance or mixture

OSHA HCS 2012

•

Flammable Liquids 3

Acute Toxicity Oral 4

Aspiration 1

Specific Target Organ Toxicity Single Exposure 3: Narcotic Effects

Label elements

OSHA HCS 2012

DANGER

Hazard statements

•

Flammable liquid and vapour

Harmful if swallowed

May be fatal if swallowed and enters airways

May cause drowsiness or dizziness

Precautionary statements

Prevention

•

Keep away from heat, sparks, open flames and/or hot surfaces. - No smoking.

Keep container tightly closed.

WERCS 303 Fabric GuardWERCS 303 Fabric GuardWERCS 303 Fabric GuardWERCS 303 Fabric Guard

Preparation Date: 08/September/2015Preparation Date: 08/September/2015Preparation Date: 08/September/2015Preparation Date: 08/September/2015

Revision Date: 23/March/2017Revision Date: 23/March/2017Revision Date: 23/March/2017Revision Date: 23/March/2017

Format: GHS Language: English (US)Format: GHS Language: English (US)Format: GHS Language: English (US)Format: GHS Language: English (US)

OSHA HCS 2012OSHA HCS 2012OSHA HCS 2012OSHA HCS 2012

Page 1 of 8Page 1 of 8Page 1 of 8Page 1 of 8

Summary of content (8 pages)

PAGE 1
WERCS 303 Fabric Guard Safety Data Sheet Section 1: Identification Product identifier Product Name Synonyms • WERCS 303 Fabric Guard • 591216 • 130606; 30602; 30603; 30604; 30605; 30606; 30607; 30616; 30618; 30674 Product Code Relevant identified uses of the substance or mixture and uses advised against Recommended use Restrictions on use • Product is used on recommended materials to create water repellency • Read and follow label directions for product use, safety warnings and hazards Details of th
PAGE 2
WERCS 303 Fabric Guard Ground and/or bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing mists, vapours, and/or spray. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
PAGE 3
WERCS 303 Fabric Guard Section 4: First-Aid Measures Description of first aid measures Inhalation Skin Eye Ingestion • IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Administer oxygen if breathing is difficult. Give artificial respiration if victim is not breathing. If signs/symptoms continue, get medical attention. • IF ON SKIN: Wash with plenty of soap and water. Wash contaminated clothing before reuse.
PAGE 4
WERCS 303 Fabric Guard ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet) ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Keep unauthorized personnel away. Stay upwind. Keep out of low areas. Ventilate closed spaces before entering.
PAGE 5
WERCS 303 Fabric Guard Exposure controls Engineering Measures/Controls • Good general ventilation should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Use only appropriately classified electrical equipment.
PAGE 6
WERCS 303 Fabric Guard • Stable under normal temperatures and pressures. Possibility of hazardous reactions • Hazardous polymerization will not occur. Conditions to avoid • Keep away from heat, sparks, and flame. Incompatible materials. Incompatible materials • Strong alkalis, acids, and oxidizers.
PAGE 7
WERCS 303 Fabric Guard Skin Acute (Immediate) • May cause mild irritation. • No data available. Chronic (Delayed) Eye Acute (Immediate) • May cause mild irritation. • No data available. Chronic (Delayed) Ingestion Acute (Immediate) • Harmful if swallowed. Material may be aspirated into lungs during ingestion and/or subsequent vomiting. Aspiration of this material will cause severe lung injury, chemical pneumonitis, pulmonary edema or death. • No data available.
PAGE 8
WERCS 303 Fabric Guard Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code • None specified. • No data available Section 15 - Regulatory Information Safety, health and environmental regulations/legislation specific for the substance or mixture SARA Hazard Classifications • Acute, Fire Inventory Component CAS Acetic acid, butyl ester 123-86-4 TSCA Yes United States Environment U.S.