- LG Software Innovations Two-Way Radio User Manual

1-13

Cisco SDM Express

OL-7141-04

Chapter 1 Cisco SDM Express

Internet (WAN): Autodetect Encapsulation

Cisco SDM Express supports autodetect on SB 106, SB 107, Cisco 836 and Cisco

837 routers. However, if you are configuring a Cisco 837 router running a Cisco

IOS release 12.3(8)T or 12.3(8.3)T, the autodetect feature is not supported.

Click the Autodetect button to have Cisco SDM Express discover the

encapsulation type. If Cisco SDM Express succeeds, it will automatically supply

the encapsulation type and other configuration parameters it discovers.

If Cisco SDM Express is unable to detect the type of encapsulation, you must

specify the encapsulation and authentication types by clicking User Specified.

Status Icon and Enable or Disable Button

The Status icon is displayed when you are using Cisco SDM Express to edit an

initial configuration. The Up arrow icon indicates the interface is up. The Down

arrow icon indicates the interface is down.

The Enable or Disable button is available when you are using

Cisco SDM Express to edit an initial configuration. If a selected interface is

enabled, you can use the Disable button to shut down the interface. If a selected

interface is shut down, you can use the Enable button to enable the interface.

Internet (WAN): User Specified Encapsulation

Use this window to configure a WAN interface when you are specifying the

encapsulation.