- LG Software Innovations Two-Way Radio User Manual

1-15
Cisco SDM Express
OL-7141-04
Chapter 1 Cisco SDM Express
Internet (WAN): User Specified Encapsulation
Address Type List
Select one of the following:
• Static IP Address—If you choose static IP address, enter the IP address and
subnet mask or the subnet bits in the fields provided.
• Dynamic (DHCP Client)—If you choose Dynamic, the router will lease an
IP address from a remote DHCP server. Enter the name of the DHCP server
that will assign addresses.
• IP Unnumbered—Select IP Unnumbered if you want the interface to share
an IP address that has already been assigned to another interface. Then,
choose the interface whose IP address you want the interface that you are
configuring to use.
• Easy IP (IP Negotiated)—Select Easy IP (IP Negotiated) if the router will
obtain an IP address by PPP/IPCP address negotiation.
IP Address for Remote Connection in Central Office Field
If you are configuring a G.SHDSL connection, enter the IP address of the gateway
to which this link will connect. This IP address is supplied by the service provider
or network administrator. The gateway is the system that the router must connect
to in order to access to the Internet or to your organization’s WAN.
Authentication Type Check Box
Check the box for the type of authentication used by your service provider. If you
do not know which type your service provider uses, you can check both boxes: the
router will attempt both types of authentication, and one attempt will succeed.
CHAP authentication is more secure than PAP authentication.
Username Field
Enter the username given to you by your Internet service provider or network
administrator and is used as the username for CHAP and/or PAP authentication.
Password Field
Enter the password exactly as given to you by your service provider. Passwords
are case sensitive. For example, the password “test” is not the same as “Test”.