- LG Software Innovations Two-Way Radio User Manual

Chapter 2 Cisco SDM Express Edit Mode
Reset to Factory Defaults
2-18
Cisco SDM Express
OL-7141-04
Microsoft Windows NT
From the Control Panel, double-click the Network icon to display the Network
window. Click Protocols, select the first TCP/IP Protocol entry, and click
Properties. In the Properties window, select the Ethernet adapter used for this
connection. Click Obtain an IP Address Automatically to obtain a dynamic IP
address.
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2 or any other address in the 10.10.10.0 subnet greater than 10.10.10.1.
Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
Microsoft Windows ME
From the Control Panel, double-click the Network icon to display the Network
window. Double-click the TCP/IP Protocol entry with the Ethernet adapter being
used for this connection to display TCP/IP Properties. In the IP address tab, click
Obtain an IP Address Automatically to obtain a dynamic IP address.
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2 or any other address in the 10.10.10.0 subnet greater than 10.10.10.1.
Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
Microsoft Windows 2000
From the Control Panel, select Network and Dialup Connections/Local Area
Connections. Select the Ethernet adapter in the Connect Using field. Select
Internet Protocol, and click Properties. Click Obtain an IP Address
Automatically to obtain a dynamic IP address.
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2 or any other address in the 10.10.10.0 subnet greater than 10.10.10.1.
Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.
Microsoft Windows XP
Click Start, select Settings, Network Connections, and then select the LAN
connection you will use. Click Properties, select Internet Protocol TCP/IP, and
click the Properties button. Click Obtain an IP Address Automatically to
obtain a dynamic IP address.
For a static IP address, click Specify an IP address. Enter the IP address
10.10.10.2 or any other address in the 10.10.10.0 subnet greater than 10.10.10.1.
Enter the subnet 255.255.255.248. You can leave other fields blank. Click OK.