Instruction Manual

Maintenance
65
H
ANDLING AND
C
ARE OF
Z
IP
D
ISKS
Although the plastic shell protects the data surface from most accidental damage, the following rules MUST
be observed:
DO
remove the disk from the drive after use. Return it to its protective case to prevent
damage from dirt and spills.
DO NOT
manually open the access door on the disk drive.
DO NOT
open the disk when it is outside the drive.
DO NOT
insert objects into the disk.
DO NOT
handle the front edge of the disk. Oils can be transferred from hands to the
media surface.
DO NOT
transport the drive with the disk inserted. If the drive is to be moved with the
power off, the disk must be removed before turnoff.
DO NOT
leave a disk partially inserted in the drive. This increases the possibility of
damaging the disk or the drive.
DO NOT
put a disk near a loudspeaker, transformer, telephone or electric motor.
DO NOT
expose disks to direct sunlight or moisture.
DO NOT
expose disks to magnetic fields greater than 30 Gauss.
DO NOT
store disks at temperatures above 125º F (50º C).
Special Button Sequences
SPECIAL BUTTON SEQUENCE FUNCTIONS
Button Sequence Function
Utility+Power Switch Restore previous operating system version
Utility+Hot Key 1 Load new operating system to flash memory
Utility+Hot Key 2 Copy operating system to Zip disk. This is useful when
installing the operating system on non-networked
DigiCarts.
Utility+Hot Key 3 Not assigned
Utility+Hot Key 4 Front panel LED test. All indicators should illuminate
together for 3 seconds.