User guide

DigiCart/II Plus Owner's Manual Operating Instructions • 37

1. Press the SETUP MENU button and use the selection controls to choose and

confirm your selection:

CART SPINDOWN

OFF

NOTE: If spun down, remember to allow a few extra seconds for the Cart to spin up the next time

you want to use it. You can force the cart to spin up in preparation of playback by selecting a cut

or moving to the Directory level and back to the Cut level.

Sync Source

Used to set the digital reference sync signal input source to either INTERNAL or EXTERNAL.

SYNC SOURCE

INTERNAL

SYNC SOURCE

DIGITAL INPUT

Digital Output

The DigiCart/II Plus can output audio on all output connectors simultaneously. Analog output is

always available on the analog connectors. However, the DIGITAL OUTPUT can be disabled or

enabled and can output data in one of three selected formats. The DIGITAL OUTPUT menu

enables or disables the digital outputs and selects the format of the digital audio at the outputs.

By default, recordings made from the analog inputs and the professional AES/EBU or

AES/SMPTE-75 inputs are not copyright protected when output in the consumer format. The

COPY PROTECTED CONSUMER MODE allows non-protected material to be output as a

NOTE: The XLR outputs should not be used when the CONSUMER and COPY PROTECTED

CONSUMER settings are selected.

1. Press the SETUP MENU button and use the selection controls to choose and

confirm your selection:

DIGITAL OUTPUT

PROFESSIONAL FORMAT