Manual

Instant Replay Owner’s Manual page 27
1 . 0 0 0 1
(FOR TRANSFER OF A SINGLE CUT)
DRIVE DIRECTORY INDEX NUMBER
1 . 0 X X X
(FOR TRANSFER OF ALL CUTS)
The numeric keys of the keyboard are used to enter digit numbers. The left and right arrows
select a digit to edit, skipping over non-editable columns. Press ENTER at the edit prompt to
complete selection of the destination location.
Note the drive number must be left at '1' and the directory number at '0' when sending to other
Instant Replay machines.
However, when sending to machines such as the DigiCart/II which support multiple drives
and directories, the drive and directory numbers may be changed.
5. Press the down arrow. The display will show:
BEGIN TRANSFER
PRESS ENTER/CANCEL
6. Press ENTER and the transfer will proceed. The display initially shows:
PREPARING TO SEND
PRESS ENTER/CANCEL
Once the destination machines have been activated to receive the display changes to:
FILE 1 OF 1 ß FILE NUMBER AND TOTAL NUMBER OF FILES
00% COMPLETED ß PERCENT COMPLETED FOR THE CURRENT FILE
If no buttons are pressed, the percentage is updated until an error occurs or the transfer is
completed. The display then shows:
TRANSFER COMPLETE
PRESS ENTER/CANCEL
If an error occurs during sending the display briefly shows:
TRANSFER ERROR
XXXX ß ERROR MESSAGE