Owner manual

TCR Series User's Guide Machine Setup 5-23
2. Select the desired track assignments.
• Select item 0 (RESET TO DEFAULTS) to reset all track assignments to their
default settings as listed below:
Track 1: FOLLOW A1 AND DA1
Track 2: FOLLOW A2 AND DA2
Track 3: FOLLOW CHANNEL DA3
Track 4: FOLLOW CHANNEL DA4
Track 5: FOLLOW CHANNEL DA5
Track 6: FOLLOW CHANNEL DA6
Track 7: FOLLOW CHANNEL DA7
Track 8: FOLLOW CHANNEL DA8
• Select item 1 through 8 to set the assignments for tracks 1 through 8, respectively.
The following selections are available for each track:
FOLLOW A1 AND DA1: the selected track will arm when channels A1
(Analog Audio 1) or DA1 (Digital Audio 1) are enabled on the controlling
device.
FOLLOW A2 AND DA2: the selected track will arm when channels A2 or
DA2 are enabled on the controlling device.
IGNORE ARM COMMANDS: the track will not arm when channels are
enabled on the controlling device.
FOLLOW CHANNEL A1: the selected track will arm when channel A1 is
enabled on the controlling device.
FOLLOW CHANNEL A2: the selected track will arm when channel A2 is
enabled on the controlling device.
FOLLOW CHANNEL DA1: the selected track arms when channel DA1 is
enabled on the controlling device.
FOLLOW CHANNEL DA2: the selected track arms when channel DA2 is
enabled on the controlling device.
FOLLOW CHANNEL DA3: the selected track arms when channel DA3 is
enabled on the controlling device.
FOLLOW CHANNEL DA4: the selected track arms when channel DA4 is
enabled on the controlling device.
FOLLOW CHANNEL DA5: the selected track arms when channel DA5 is
enabled on the controlling device.
FOLLOW CHANNEL DA6: the selected track arms when channel DA6 is
enabled on the controlling device.
FOLLOW CHANNEL DA7: the selected track arms when channel DA7 is
enabled on the controlling device.
FOLLOW CHANNEL DA8: the selected track arms when channel DA8 is
enabled on the controlling device.