Owner manual

TCR Series UserManual Operations 4-21

This behavior is shown in the illustration below.

EDIT-IN THRU EDIT-OUT

CurrentFile

Before Erase

CurrentFile

After Erase

0.000.000.00Start of File 0.000.000.00Head Point 0.000.000.00Tail Point 0.000.000.00End of File

0.000.000.00Start of File

0.000.000.00Head Point

Fade

01:00 02:00 03:00 04:00

File Timeline

The run time of a file can be reduced from the tail end of a file if these conditions are met.

1. The Tail Point of the file is between the Edit-In and Edit-Out points.

2. The Edit-Out point must be later on the timeline than the end of the audio in the file.

This behavior is shown in the illustration below.

EDIT-IN THRU EDIT-OUT

0.000.000.00Tail Point

Fade

Current File

Before Erase

Current File

After Erase

01:00 02:00 03:00 04:00

File Timeline

End of File

Tail Point

Start of File Head Point End of File

Use the following steps to erase the Edit-In point through the Edit-Out point:

1. Open the desired file to access its Transport Screen.

2. Enter the Edit-In point and the Edit-Out point for the segment to be erased.

3. On the Transport Screen, press MENU.

4. On the Transport menu, select item 4, ERASE EDIT-IN THRU EDIT-OUT.