Owner manual

4-32 Operations TCR Series UserManual
This is shown in the illustration below.
0.000.000.00Tail Point
EDIT-IN
Current File
Before Insert
Source File
Current File
After Insert
0.000.000.00Start of File
0.000.000.00Head Point
0.000.000.00End of File
FadeFade
0.000.000.00Head Point 0.000.000.00Tail Point
EDIT-IN THRU EDIT-OUT
0.000.000.00End of File
01:00 02:00 03:00 04:00
File Timeline
01:00 02:00 03:00 04:00
03:00 04:00 05:00 06:00
Use the following steps to insert a segment in front of the Edit-In point:
1. Ensure that the desired source file exists.
2. Open the desired file to access its Transport Screen.
3. Enter the desired Edit-In point.
4. On the Transport Screen, press MENU.
5. On the Transport menu, select item 8, INSERT IN FRONT OF EDIT-IN. The Insert
menu will appear, as shown below.
INSERT IN FRONT OF EDIT-IN
0. INSERT NOW
1. TRACK 1 : NO
2. TRACK 2 : NO
3. TRACK 3 : YES
4. > TRACK 4 : YES
5. TRACK 5 : NO
6. TRACK 6 : NO
7. TRACK 7 : NO
8. TRACK 8 : NO
9. SOURCE FILE : CLIPBOARD
'ENTER' OR NUMBER SELECTS MENU ITEM
Insert Menu (TCR8 Display)
6. To select the track(s) to be inserted, use the Jog Wheel or Arrow keys, and press ENTER;
or simply press the number of the desired track. The Insert Track Usage menu appears for
the selected track.