Owner manual

5-2 Error! No text of specified style in document. TCR Series User's Guide
Setup Menu Functions
MENU | Machine Setup
The Setup Menu provides a variety of important machine setup functions that pertain to the entire
TCR
™
system, rather than to specific functional modes. The entire machine setup can be saved in
one of ten configurations using the Store Machine Setup function. Each configuration is stored in
nonvolatile memory so that the settings are retained when TCR power is off.
To reach the Setup Menu, select item 0 (MACHINE SETUP) on the Drive Menu, the Directory
Menu, the File Menu or the Editor Menu.
SETUP: ANALOG + INTERNAL
0. > PREFERENCES
1. AUDIO I/O
2. SYNC AND TIME CODE
3. EXTERNAL CONTROL
4. DRIVES
5. RECALL MACHINE SETUP
6. STORE MACHINE SETUP
7. USE FACTORY DEFAULTS
'ENTER' OR NUMBER SELECTS MENU ITEM
PRESS 'EXIT' TO EXIT MENU
Setup Menu
The following setup functions are provided:
• Preferences — sets system operating preferences.
• Audio I/O — sets audio input and output parameters.
• Sync and Time Code — sets sync reference, time code and chase mode parameters.
• External Control — sets general purpose I/O and RS-422 (remote control) parameters.
• Drives — defines which drives are present and enabled.
• Recall Machine Setup — allows the user to recall one of ten stored configuration registers.
• Store Machine Setup — allows the user to store a machine setup.
• Use Factory Defaults — resets all TCR machine settings to factory default values
Each function is explained in the following sections.
Note Refer to the “Selecting Menu Functions” section in Chapter 3 for
instructions on making menu and function selections.