User guide

ManualsBrands3B Scientific ManualsOptical devicesMonocular Course Microscope Model 100 (115 V, 50__60 Hz)

3B SCIENTIFIC

PHYSICS

Monocular Course Microscope M 100 (115 V, 50/60 Hz) 1005401

Monocular Course Microscope M 100 (230 V, 50/60 Hz) 1005402

Instruction Manual

07/13 ALF

1 Eyepiece

2 Tube

3 Stand

4 Revolver with objectives

5 Lock screw for object stage

6 Specimen clips

7 Object stage

8 Adjustment knob for coarse

focusing

9 Condensor with iris dia-

phragm and filter holder

10 Adjustment knob for fine

focusing

11 Lamp housing

12 Mains switch

1. Safety notes

• For power supply use only electrical sockets

with ground contact.

Caution! The Stirling engine becomes hot during

use. Risk of burns!

• Do not touch the lamp during or immediately

after use.

2. Description, technical data

The monocular course microscope allows two-

dimensional viewing of objects (thin sections of

plant or animal specimen) in 40x to 400x magni-

fication.

The microscope 1005401 is for operation with a

mains voltage of 115 V (±10%), and the

1005402 unit is for operation with 230 V (±10%).

Stand: All-metal stand, arm firmly connected

with base, pinion knobs attached on both sides

of the stand for coarse and fine focusing

Tube: Monocular inclined 45°, head rotation 360°

Eyepiece: Widefield eyepiece WF 10x 18 mm

with pointer

Objectives: Revolver with 3 DIN achromatic

objectives 4x / 0.10, 10x / 0.25, 40x / 0.65 (with

specimen protection)

Magnification: 40x, 100x, 400x

Object stage: 110 x 120 mm

with 2 specimen clips

Illumination: 20 W tungsten lamp integrated in

base, power supply 1005401: 115 V, 50/60 Hz,

1005402: 230 V, 50/60 Hz

Condenser: Bright-field condenser N.A. 0.65,

iris diaphragm, filter holder and blue filter

Dimensions: 175 x 135 x 370 mm³ approx.

Weight: 2.9 kg approx.

Summary of content (4 pages)

PAGE 1
3B SCIENTIFIC® PHYSICS Monocular Course Microscope M 100 (115 V, 50/60 Hz) 1005401 Monocular Course Microscope M 100 (230 V, 50/60 Hz) 1005402 Instruction Manual 07/13 ALF 1 2 3 4 5 6 7 8 Eyepiece Tube Stand Revolver with objectives Lock screw for object stage Specimen clips Object stage Adjustment knob for coarse focusing 9 Condensor with iris diaphragm and filter holder 10 Adjustment knob for fine focusing 11 Lamp housing 12 Mains switch Stand: All-metal stand, arm firmly connected with base, pinion k
PAGE 2
• 3. Unpacking and assembly The microscope is packed in a molded styrofoam container. • Take the container out of the carton remove the tape and carefully lift the top half off the container. Be careful not to let the optical items (objectives and eyepieces) drop down. • To avoid condensation on the optical components, leave the microscope in the original packing to allow it to adjust to room temperature.
PAGE 3
• • • • Use a soft linen cloth and some ethanol to clean the microscope. Use a soft lens tissue to clean the optics. The packaging should be disposed of at local recycling points. Should you need to dispose of the equipment itself, never throw it away in normal domestic waste. Local regulations for the disposal of electrical equipment will apply. 3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Germany • www.3bscientific.
PAGE 4