User's Manual

118 CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
The Address Table Add Page contains the following fields:
■ VLAN ID — Assigns a VLAN ID to the user-defined MAC Address.
■ MAC Address — Defines a MAC Address to be assigned to the
specific port and VLAN ID.
■ No Aging — Indicates that the MAC address assigned by the user is
not aged out.
■ Checked — Indicates that the Address Table entry assigned by the
user is not aged out.
■ Unchecked — Indicates that the Address Table entry assigned by
the user is aged out.
■ Select a Port — Select the port for which the MAC settings are
defined.
■ MAC Address — Displays the current MAC addresses listed in the
MAC address table.
■ VLAN ID — Displays the VLAN ID assigned to the user-defined MAC
Address.
■ State — Displays the current MAC Address state. Possible values are:
■ Config Static — Indicates that the Address Table entry assigned by
■ Port Index — Indicates Port Table entry number.
■ Aging Time — Specifies the amount of time the MAC Address
remains in the Dynamic MAC Address table before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.
2 Define the fields.
3 Click Apply. The MAC address is added to the address table, and the
device is updated.