User's Manual

76 CHAPTER 4: MANAGING DEVICE SECURITY
Configuring ACL
Binding
The ACL Binding Setup Page allows the network administrator to bind
specific ports to MAC or IP Based ACLs.
The monitor user has no access to this page.
To define ACL Binding:
1 Click Device > ACL > ACL Binding > Summary. The ACL Binding
Summary Page opens:
Figure 37 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
■ Select Port(s) — Indicates the ports to be configured.
■ Bind ACL — Assigns an Access Control List to a port or LAG.
■ MAC-based ACL — Displays the MAC based ACL to which the
interface is assigned.
■ IP-based ACL — Displays the IP based ACL to which the interface is
assigned.
■ Select ACL — Contains a list of previously defined Access Control
Lists to which the port or LAG can be bound. To bind an ACL to a
LAG, the ACL should be bound to its port members.
2 Define the relevant fields.
3 Click Apply. ACL Binding is defined, and the device is updated.