User's Manual

84 CHAPTER 5: GENERAL SYSTEM INFORMATION
■ DST Region — Selects USA or European standard DST, or
customizable DST.
■ USA — The device switches to DST at 2:00 a.m. from the second
Sunday in March, and reverts to standard time at 2:00 a.m. on the
First Sunday of November
■ European — The device switches to DST at 1:00 am on the last
Sunday in March and reverts to standard time at 1:00 am on the
last Sunday in October. The European option applies to EU
members, and other European countries using the EU standard.
■ Other — The DST definitions are user-defined and can be
customized to your location. If Other is selected, the From and To
fields must be defined.
■ Time Set Offset — Sets the amount of time adjusted for DST (in
minutes). The default time is 60 minutes.
■ From — Indicates the non-recurring time that DST begins when the
region is set to Other. Enter the Hours, Minutes, Month, day, and Year
for DST to begin.
■ To — Indicates the non-recurring time that DST ends when the region
is set to Other. Enter the Hours, Minutes, Month, day, and Year for
DST to end.
■ Recurring — When the region is set to Other, this check box enables
user-defined DST that is constant from year to year.
■ Recurring From — The recurring time that DST begins each year.
Select or type the Day, Week, Month, and Time.
■ Recurring To — The recurring time that DST ends each year. Select or
type the Day, Week, Month, and Tim.:
2 Define the local Time and Date.
3 Enable or disable automatic DST by clicking the Daylight Savings box.
4 Configure the region, Time Set Offset, Recurring, From and To fields as
appropriate for your location.
5 Click Apply. The DST settings are saved, and the device is updated.
6 Be sure to save your configuration, or you changes will be lost when the
switch is rebooted. To save the configuration, refer to “Saving the
Configuration” on page 37.