Switch Command Reference Guide

qos classifier define
697
Flow Classifier Procedure
To accept the default or current values that appear in brackets [ ], press
Enter.
1
Enter a classifier number in the range of from
1
through
399
.
Flow classifiers
20
and
23
are predefined for FTP and Telnet.
2
Enter the classifier name (a unique name of up to 32 characters).
3
Enter a cast type.
For a flow classifier, the options are
unicast
,
multicast
, and
all
.
4
Enter the IP protocol type of
TCP
,
UDP
, or
all
.
5
Enter the source IP address. The default value is
0.0.0.0
.
6
Enter the source IP address mask. The default value is
0.0.0.0
.
7
Enter the destination IP address.
8
Enter the destination IP address mask.
9
Enter the start of the TCP or UDP source port range, in the range of from
0
through
65535
. The default is
0
.
10
Enter the end of the TCP or UDP source port range using a value of up to
65535
.
Custom
protocol
hexidecimal
value (custom
nonflow
classifiers only)
Hex values for
nonflow
classifiers
with the protocol
custom type
■
Ethertype hex value of
0x0 – 0xfffe
■
DSAP hex value of
0x0 – 0xff
Note:
You cannot enter
0xaa - 0xaa
■
SSAP hex value of
0x0 – 0xff
Note:
You cannot enter
0xaa - 0xaa
0x0
–
0x0
802.1p tag For
nonflow
classifiers only, IEEE
802.1p tag values
■
Any combination of
priority tag values in the
range of
0 – 7
■
all
■
? (for a list of possible
values)
–
Prompt Description Possible Values [Default]