LAN PC Card User Guide

2-2 CHAPTER 2: INSTALLING THE TOKENLINK VELOCITY PC CARD
If you are using Card and Socket Services, you may be
able to use hot-pluggability features with your 3C389
PC Card. See Appendix C, “Hot-Pluggability and
Suspend/Resume” for more information
1 Turn off the power to the PC.
2 Attach the cable to the 3C389 PC Card (Figure 2-1).
Retract the latch by sliding the half-circle latching button
on the connector backwards toward the cable. The cable
cannot be connected or disconnected unless the latch is
retracted.
With the part number facing down, attach the cable
connector to the 3C389 PC Card.
The connector can attach to the 3C389 PC Card in only
one way. If the connector does not seem to fit, turn it
over and gently try again.
The cable for the 3Com 3C689 TokenLink III PC Card is not
compatible with the 3C389 PC Card.
Figure 2-1 Attaching the Cable to the 3C389 PC Card
PC card
Latching button
Part number
(on bottom)
16/4 PC Card
TokenLink
®
Velocity
™
INSERT
THIS SIDE UP
3C389