User Manual

Installing From Diskette 23
Before you start, make sure that you have two blank,
formatted diskettes. Label the diskettes EtherDisk 1
and EtherDisk 2.
■ EtherDisk 1 contains:
■ NDIS 3/4/5 drivers
■ NetWare client and server drivers
■ Windows for Workgroup drivers
■ NIC preinstallation program
■ README.TXT file
■ EtherDisk 2 contains:
■ NDIS 2 driver
■ PACKET driver
■ Help text files
■ DOS utilities
To create installation diskettes from the EtherCD:
1 Turn on the power to the PC and start Windows.
2 Insert the EtherCD in the CD-ROM drive.
The EtherCD Welcome screen appears.
If the EtherCD Welcome screen does not appear, enter
the following command from the Run option of the
Windows Start menu:
d:\installs\setup.exe
where d:\ represents the letter name of the CD-ROM drive.
3 Click NIC Software.
4 Click NIC Drivers and Diagnostics.
5 Click Installation Utilities.
6 Click Create Installation Diskettes.
The EtherCD Diskette Creation Utility Welcome
screen appears.
7 Click Next.
8 Insert the blank, formatted diskette labeled
EtherDisk 1 in the PC, and then click Next.
Files are copied.
book Page 23 Thursday, July 29, 1999 12:23 PM