User Manual

42 CHAPTER 3: INSTALLING NIC SOFTWARE IN WINDOWS

Windows NT 3.51

To install the network driver:

1 Turn on the power to the PC.

2 In the Main window of the Program Manager,

double-click the Control Panel icon and then the

Network icon.

3 Click Add Adapter.

The Add Network Adapter window appears.

4 Open the Network Adapter Card list box, and

scroll down and select <Other> Requires disk

from manufacturer.

5 Click Continue.

The Insert Disk dialog box appears.

6 Insert the EtherCD in the CD-ROM drive. Make

sure that d:\ appears in the entry box, where d:\

represents the letter name of the CD-ROM drive, and

then click OK.

The Select OEM Option window appears.

7 Make sure that the name of the NIC is selected, and

then click OK.

Files are copied. The Network Settings window appears.

The name of the installed NIC appears in the list of installed

adapter cards.

8 Click OK.

If the TCP/IP Conﬁguration screen appears, enter the

requested information for your network environment.

Refer to your system administrator or the Windows NT

documentation for assistance.

If the TCP/IP Conﬁguration screen does not appear, the

installation is complete.

9 Restart the PC.

The installation is complete. Go to the next section,

“Verifying Successful Installation,” to conﬁrm that the

NIC is properly installed.

book Page 42 Thursday, July 29, 1999 12:23 PM