User Manual

60 CHAPTER 5: CONFIGURING THE NIC

4 If your PC has more than one NIC installed, open the

Network Interface Card (NIC) list box and select the

NIC to be conﬁgured.

5 Click the Conﬁguration tab.

The Conﬁguration screen appears.

6 Under Network Parameter, select the setting to

be changed.

For a description of each setting, click the question mark (?)

in the upper right corner of the screen, move it over a

setting, and click once.

7 Open the Set Value list box and select a new value

from the list of available options.

Repeat the process to change any other conﬁguration

setting.

To undo changes and return the settings to their previous

values, click Undo Changes.

To return the settings to the factory default settings, click

Set Factory Defaults.

8 Click OK to save the changes and exit the program.

Conﬁguring the Managed PC Boot Agent (MBA)

This section explains how to conﬁgure the 3C905C-TX-M

and 3C905B-TX-M NICs’ Managed PC Boot Agent (MBA)

boot ROM to boot from the network.

Click Help to obtain general information about the

function of a screen. To obtain speciﬁc information about

any topic on a screen, click the question mark (?) in the

upper right corner of the screen, move it over a topic, and

click once.

For detailed information on using, conﬁguring,

and troubleshooting the MBA boot ROM, see the

Managed PC Boot Agent User Guide, located with

the MBA software on the EtherCD.

book Page 60 Thursday, July 29, 1999 12:23 PM