User Manual

2-2 C HAPTER 2: I NSTALLING THE N ETWORK D RIVER
Before You Install the Network Driver
Now that the CardBus PC Card is inserted in your notebook
and the network cable is connected to the network port,
the final installation step is to install the network driver.
This section describes the requirements for a successful
driver installation.
Which Driver Installation Instructions Should You Use?
Ask your MIS department which network driver instructions
you should use. Instructions are provided in this chapter for
each of the following environments:
■ Windows 95 version 4.00.950 or 4.00.950a
■
Windows 95 version 4.00.950b (OSR 2)
■
Windows NT version 4.0
■ Windows NT version 3.51
■
Windows for Workgroups
For information about Banyan Vines, Microsoft LAN
Manager, IBM LAN Server, Artisoft LANtastic, and DEC
PATHWORKS, see Table 2-1.
Proceed to the driver installation section in this user guide
that your MIS department recommends.
Which Windows 95 Version Are You Running?
You must determine if you are running Windows 95 OEM
Service Release 2 (OSR 2) or the standard Windows 95
before you install the network driver.
Since standard Windows 95 does not support CardBus
automatically, the driver installation instructions are different.
If you already know which version of Windows 95 you are
running, go to the appropriate Windows 95 section to install
the CardBus PC Card network driver on your notebook.
1 Double-click My Computer and then Control Panel.
2 In the Windows 95 Control Panel, double-click System
to display the System Properties dialog box.
3 Click the General tab to display the Windows 95
version information.