User Manual

3-18 CHAPTER 3: TROUBLESHOOTING
Are my network drivers Microsoft
certified?
Yes.
Are my network drivers Novell
certified?
Yes.
How do I remove the 3Com icon
from my system tray?
1 Double-click the 3Com icon to start the
3Com PC Card Diagnostics program.
2 In the right bottom corner of the main
window, click the Enable Tray Control
check box to remove the check mark.
3 Exit the program and the icon will not
appear anymore.
How can I remove the PC Card
Diagnostics Program?
1 In the Windows 95 Control Panel, select
Add/Remove Programs.
2 Select 3Com PC Card Diagnostic Utilities.
3 Click Add/Remove.
4 The PC Card Diagnostics program is
removed from your notebook.
Does the CardBus PC Card support
full duplex?
Yes, the CardBus PC Card supports full
duplex at 10 Mbps and 100 Mbps
operation.
What should I do if the CardBus PC
Card installs as a “Generic PCI
Ethernet Controller” under Other
Devices in the Device Manager?
If the CardBus PC Card installs as a generic
PCI Ethernet controller, follow these steps:
1 In the Device Manager, double-click
Other Devices.
2 Click the PCI Ethernet Controller.
3 Click Remove.
4 Restart your notebook.
What should I do if a yellow
exclamation point appears next to
the 3Com Megahertz 10/100 LAN
CardBus PC Card name?
1 In the Device Manager, double-click
Other Devices.
2 Click the PCI Ethernet Controller or the
duplicate 3Com Megahertz 10/100 LAN
CardBus PC Card entry.
3 Click Remove.
4 Restart your notebook.
(continued)
Table 3-3. Frequently Asked Questions (continued)
Question Answer