Owner's Manual

129
View ATM OC-3c interface view, STM-1 interface view
Parameter None
Description Use the
scramble command to enable payload scrambling on the ATM
OC-3c/STM-1 interface. This, however, does not affect cell headers.
Use the
undo scramble command to disable payload scrambling.
By default, payload scrambling is enabled on the ATM OC-3c/STM-1 interface.
Example # Enable payload scrambling on ATM interface 5/0.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] scramble