Owner's Manual

1413
pim hello-option holdtime
Syntax pim hello-option holdtime interval
undo pim hello-option holdtime
View Interface view
Parameter interval: PIM neighbor timeout time in seconds, with an effective range of 1 to
65,535.
Description Use the
pim hello-option holdtime command to configure the PIM neighbor
timeout time on the current interface.
Use the
undo pim hello-option holdtime command to restore the default
setting.
By default, the PIM neighbor timeout time is 105 seconds.
Related command: hello-option holdtime (PIM view).
Example # Set the PIM neighbor timeout time to 120 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option holdtime 120
pim hello-option lan-delay
Syntax pim hello-option lan-delay interval
undo pim hello-option lan-delay
View Interface view
Parameter interval: Prune delay in milliseconds, with an effective range of 1 to 32,767.
Description Use the
pim hello-option lan-delay command to configure the prune delay
time on the current interface.
Use the
undo pim hello-option lan-delay command to restore the default
setting.
By default, the prune delay to 500 milliseconds.
Related command: pim hello-option override-interval, hello-option override-interval (PIM
view), and hello-option lan-delay (PIM view).
Example # Set the prune delay time to 200 milliseconds on Ethernet 1/0.