Owner's Manual

1480 CHAPTER 93: IPV6 PIM CONFIGURATION COMMANDS
By default, the IPv6 PIM neighbor timeout time is 105 seconds.
Related command: pim ipv6 hello-option holdtime.
Example # Set the IPv6 PIM neighbor timeout time to 120 seconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option holdtime 120
hello-option lan-delay (IPv6 PIM view)
Syntax hello-option lan-delay interval
undo hello-option lan-delay
View IPv6 PIM view
Parameter interval: Prune delay in milliseconds, with an effective range of 1 to 32,767.
Description Use the
hello-option lan-delay command to configure the global value of
prune delay time, namely the length of time the device must wait upon receiving a
prune message from downstream before taking the prune action. Within this
period of time, if the device receives a prune override message from that
downstream device, the prune action will be cancelled.
Use the
undo hello-option lan-delay command to restore the default setting.
By default, the prune delay to 500 milliseconds.
Related command: hello-option override-interval (IPv6 PIM view), pim ipv6 hello-option
override-interval and pim ipv6 hello-option lan-delay.
Example # Set the prune delay to 200 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option lan-delay 200
hello-option neighbor-tracking (IPv6 PIM view)
Syntax hello-option neighbor-tracking
undo hello-option neighbor-tracking
View IPv6 PIM view
Parameter None