Owner's Manual

1720 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS
both: Specifies both the export routing information to the destination VPN
extended community and the import routing information from the destination
VPN extended community. This is the default.
export-extcommunity: Specifies the export routing information to the
destination VPN extended community.
import-extcommunity: Specifies the import routing information from the
destination VPN extended community.
all: Specifies all export routing information to the destination VPN extended
community and import routing information from the destination VPN extended
community.
Description Use the
vpn-target command to associate the current VPN instance with one or
more VPN targets.
Use the
undo vpn-target command to remove the association of the current
VPN instance with VPN targets.
VPN target has no default. You must configure it when creating a VPN instance.
Example # Associate the current VPN instance with VPN targets.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] vpn-target 3:3 export-extcommunity
[Sysname-vpn-instance-vpn1] vpn-target 4:4 import-extcommunity
[Sysname-vpn-instance-vpn1] vpn-target 5:5 both