Owner's Manual

1857
123
MPLS QOS CONFIGURATION
COMMANDS
if-match mpls-exp
Syntax if-match [ not ] mpls-exp exp-value-list
undo if-match [ not ] mpls-exp
View Class view
Parameters exp-value-list: EXP value list, in the range 0 to 7. Users can input the eight values
repeatedly.
Description Use the
if-match mpls-exp command to configure the matching rule for EXP
domain of MPLS.
Use the
undo if-match mpls-exp command to delete the matching rule.
If this command is frequently configured under one class, the last configuration
will overwrite the previous ones.
Related commands: traffic classifier.
Examples # Define the rule to match the packet whose EXP is 3 or 4.
<Sysname> system-view
[Sysname] traffic classifier database
[Sysname-classifier-database] if-match mpls-exp 3 4
qos cql protocol mpls exp
Syntax qos cql cql-index protocol mpls exp exp-value queue queue
undo qos cql cql-index protocol mpls exp exp-value
View System view
Parameters cql-index: Group number of custom queuing list (CQL), in the range 1 to 16.